EPS F300

Packging Type:
Standard Laminated Kraft paper bag (25 Kg) 800, 850 and 1000 big
bag with inside gas barrier line.

Storage:
Snowa F300 should be stored in well-ventilated storage areas with
a temperatures preferably not exceeding 25°C. It should be protected
against unsuitable weather conditions and direct sun light. Partially used
bag should be closed as tight as original conditions, and should be
consumed in a short time. In order to maintain the expansion potential
it is recommended to use within three months after production, if the
package is not opened.

Processing Conditions:

All Processing conditions might be changeable according to a kind of
equipment’s and an aging time of materials.
From expansion of the beads to block or mod shaped products, the
entire process is managed with steam.
Snowa F300 is expandable in a single expansion at densities between
14 Kg/m³ – 20 Kg /m³. The minimum density achievable may vary
depending on the expander type and process conditions.
As temporary storage time in silos recommended 5-24 hour depend
on the density, atmosphere and process conditions.
For special applications please contact our technical service.

Caution:
Snowa F300 requires to be avoided restrictively from sparks and
flames, in order to prevent against static electricity, the equipment and
machine must be provided by enough Earth connection on the product
conveying lines and during product processing.
Also ensure ventilation on floor level during the storage and process
phases. Please make sure to read the “Material Safety Data Sheet”
(MSDS)
Snowa F300 is not suitable and not permitted for food contact
application.