| MFI |
0.28 |
|---|
HDPE EX5 (FILM)
HDPE EX5 HM9450F
made via Hostalen Process
For blown films with paper like quality, suitable for counter
bags, carried bags and w/aping films, excellent processing.
Applications
• blown
• Film
Features
• High molar mass film grade, good
stiffness and tenacity
Additives
• Antioxidant/Process stabilizer
• Lubricant (processing aid)/ acid
scavenge
Description
Additional information
| MFI |
0.28 |
|---|
Reviews (0)
Related products
LDPE 2119 (MFI: 1.9)
Download TDS
Product Description:
LFI2119 is a low-density polyethylene, with excellent optical properties. This grade offers high output and excellent drawdown and specially designed for general-purpose thin films. LFI2119 has been manufactured under SABTEC licensed technology.
Applications:
Blown film extrusion, packaging film, general lamination film
Status: Commercial: Active
Form(s): Pellet
Attribute:
Very good optical properties, good toughness, good melt strength
Additives:
Antioxidant: Yes
Antiblock : No
Slip Agent : No
| MFI |
1.9 |
|---|
HDPE 7000F Mehr ( MHPC )
Download TDS
Granules 7000 F is a high density polyethylene resin ;a product of bi-modal process from Mitsui Chemicals, Inc. of Japan
APPLICATION:
shooing bag and T-shirt bag
garbage bag
liner bag
enhanced ultra thin film
high stiffness
wide service temperature range, UV resistance
recommend film thickness at 10-20 micron
high tensile strength with good dart impact strength
low gel content
good moisture barrier
food contact applicable
good impact resistance and processability
Packing & Loading:
Each truck 22mt or 24.75mt
1375kg each pallet
پلی اتیلن سنگین گرید فیلم
پتروشیمی مهرعسلویه پلاستیک دانه نایلون دسته دار فروشگاهی
| MFI |
0.04 |
|---|---|
| Density |
0.954 |
LDPE 2420D (MFI: 0.25)
Download TDS
Product Description:
Lupolen 2420 D is a non -additivated,low density Polyethylene.It is delivered in
pellet form.
Applications:
Food Grade
Bags & Pouches
Bottles for Consumer Goods
Shrink Film
Blown Film
Film
Processing Method:
Blown Film
Injection Moulding
Extrusion Blow Moulding
Features: Good Processability, Good Tear strength, Good Toughness
| MFI |
0.25 |
|---|---|
| Density |
0.923 |
HDPE CRP100N (PIPE)
Download TDS
HM-CRP100N (PE100) is a natural pipe grade resin which
is manufactured by suspension polymerization of ethylen
monomer, HM-CRP100N )PE100) is a bi-model high density
polyethylene with 1-Butene as co monomer.
Main Applications
• Top quality PE100 pressure
• Pipes for gas and water
transportaion at higher pressures
or with thinner walls as PE80 (UV
stabilization and/ or pigments during
precessing)
Characteristic
Properties
• Natural PE100 pipe resin.
Additives
• Antioxidant/Process stabilizer
• Lubricant (processing aid)/ acid
scavenger
| MFI |
0.22 |
|---|
SD0150 ABS
| MFI |
1.7 |
|---|
PP 3212E (PIPE)
| MFI |
0.25 |
|---|
LLDPE 209AA ARAK (MFI: 0.9)
Download TDS
Main application & Characteristics:
LL0209AA are linear low density polyethylene copolymers containing butene-1
.as a co-monomer
LL0209AA are suitable for general purpose films, neat or in lean blends with
LDPE and other ethylene polymers. Lean blends applications include sacks of all
. types, FFS and agricultural films
In lean blends they offer the following advantages:
− Greater draw down.
− Improved hot-tack and lower seal shrinkage.
− Better tear resistance.
− Higher tensile stress and elongation at break.
LL0209AA should be stored in the dry condition below the 50°C and avoided
. from the exposure of direct sunlight
. Recommended melt temperature for extrusion is about 180°C - 225°C
.LL0209AA are suitable for food contact
| MFI |
0.9 |
|---|---|
| Density |
0.920 |
Reviews
There are no reviews yet.