| MFI | 25 |
|---|
PP 552R (Fiber)
Description:
″Jampilen HP552R″ is a high melt flow homopolymer for the
production of CF, BCF and fine denier staple fibers at medium
to high spinning speeds and exhibits excellent antigasfading
properties.
″Jampilen HP552R″ is suitable for nonwoven fabrics for
diapers, medical-sanitary applications and wipes. Another
typical application is high tenacity continuous filament for
straps for backpacks, sport bags, bulk bags and safety belts.
Continuous filament with medium tenacity is used for
upholstery and sportswear. ″Jampilen HP552R″ is also suited
for the production of bulked continuous filament for carpets.
″Jampilen HP552R″ is suitable for food contact.
Processing Method:
Fiber Extrusion (CF, BCF, staple)
Features:
High melt flow
Excellent antigasfading properties
Good processability
Homopolymer
Typical Applications:
Wipes and tissues
Straps for backpacks, sport bags, bulk bags and for safety belts
Upholstery and sportswear
Bulk continuous filament for carpets
Nonwoven staple fiber
Injection molded articles, housewares, etc
Approval: Food
Description
Additional information
| MFI | 25 |
|---|
Reviews (0)
Related products
LLDPE 209AA ARAK (MFI: 0.9)
Download TDS Main application & Characteristics:
LL0209AA are linear low density polyethylene copolymers containing butene-1
.as a co-monomerLL0209AA are suitable for general purpose films, neat or in lean blends with
LDPE and other ethylene polymers. Lean blends applications include sacks of all
. types, FFS and agricultural filmsIn lean blends they offer the following advantages:
− Greater draw down.
− Improved hot-tack and lower seal shrinkage.
− Better tear resistance.
− Higher tensile stress and elongation at break.LL0209AA should be stored in the dry condition below the 50°C and avoided
. from the exposure of direct sunlight
. Recommended melt temperature for extrusion is about 180°C - 225°C
.LL0209AA are suitable for food contact
| MFI | 0.9 |
|---|---|
| Density | 0.920 |
HDPE EX5 (FILM)
| MFI | 0.28 |
|---|
LLDPE 22B03 (MFI: 3)
Download TDS Application:
• High stiffness blown & cast
film
• Blending
• LaminationFeature:
Co monomer:butane-1(c4)
High stiffness Additives:
• Acid scavenger
• Antioxidants
• Lubricant
| MFI | 3 |
|---|---|
| Density | 0.920 |
HDPE 7000F Mehr (FILM)
Download TDS 7000 F is a high density polyethylene resin ;a product of bi-modal process from Mitsui Chemicals, Inc. of JapanAPPLICATION:Excellent mechanical strength and high stiffness Excellent process ability (at high speed)
Tissue-like film, garment/grocery/merchandise bags, disposal waste bags, counter bags,
grocery sacks, trash bags
| MFI | 0.04 |
|---|---|
| Density | 0.954 |
LLDPE 22B02 (MFI: 2)
Download TDS Typical applications :
For use in lean and rich blend blown film application such as over wrap,
Counter bags, shrink film and boil in the bag applications
Artificial grass
| MFI | 2 |
|---|---|
| Density | 0.920 |
LDPE 2130 (MFI: 0.3)
Download TDS Product Description:
LFI2130 is a high molecular weight, low density polyethylene for producing heavy-duty packaging films for applications like shrink hoods. It contains no slip agent and antiblock additives. It gives outstanding strength and toughness, draw down ability and very good biaxial shrink properties. LFI2130 has been manufactured under SABTEC licensed technology.Applications:Blown film extrusion, heavy duty packaging film, shrink hoods, industrial sacks, carrier bag and liners.Status: Commercial: ActiveForm(s): PelletAttribute:
Good strenght and toughness, very good melt strength.Additives:
Antioxidant: Yes
Antiblock : No
Slip Agent : No
| MFI | 0.3 |
|---|---|
| Density | 921 |
PS GPPS 1540 (MFI: 11)
| MFI | 11 |
|---|
HDPE BL3 JAM (BlowMolding)
Download TDS HF-4760(BL3) is a blow molding grade resin with high density polyethylene with
1-Butene as co monomer which is manufactured by the suspension polymerization
of ethylene monomer. Stiffness, good ESCR are it's spetial properties. High
rigidity and good flowablity which made it proper for usage in bottles and small
blow molding goods.ApplicationsSmall blow moulding
Bottles
Containers (up to 5 lit )
Packing of pharmaceuticals & surfactantsAdditives:
• Antioxidant/Process stabilizer
• Lubricant/ acid scavengerFeatures:
• High density and Stiffness, good
flowabilitty and impact Stvength
and good Stvess Cvacking resistance.
| MFI | 23 |
|---|---|
| Density | 0.954 |
Reviews
There are no reviews yet.