LDPE 1969 (MFI: 6.9)

Further Information

Health and Safety
The resin is manufactured to the highest standards, but special requirements apply to certain applications such as
food end-use contact and direct medical use. Specific information on regulatory compliance can be requested via
customer.
Molten polymer may be degraded if it is exposed to air during any of the processing and off-line operations. The
products of degradation may have an unpleasant odor. In higher concentrations they may cause irritation of the
mucus membranes. Fabrication areas should be ventilated to carry away fumes or vapors. Legislation on the control
of emissions and pollution prevention should be observed. Workers should be protected from the possibility of skin
or eye contact with molten polymer.
The resin will burn when supplied with excess heat and oxygen. It should be handled and stored away from contact
with direct flames and/or ignition sources. While burning, the resin contributes high heat and may generate a dense
black smoke.
Recycled resins may have previously been used as packaging for, or may have otherwise been in contact with,
hazardous goods. Converters are responsible for taking all necessary precautions to ensure that recycled resins are
safe for continued use.
The detailed information about safety, handling, individual protection and waste disposal is provided in the relevant
Safety Data Sheet. Additional specific information can be requested via customer.
Conveying
Conveying equipment should be designed to prevent accumulation of fines and dust particles. These particles can,
under certain conditions pose an explosion hazard. We recommend that the conveying system will be equipped with
adequate filters and be operated and maintained in the way that ensure no leaks develop.
Storage
Polyethylene resins should be protected from direct sunlight and/or heat during storage. The storage location should
also be dry, dust free and the storage temperature should not exceed 40°C. It is also advisable to process
polyethylene resins (in pelletized or powder from) within 4 months after delivery, because excessive aging of
polyethylene can lead to a deterioration in quality. Arya Sasol Polymer Company would not give any warranty to bad
storage conditions which may lead to quality deterioration such as color change, bad smell and inadequate product
performance