MFI | 0.04 |
---|---|
Density | 952 |
HDPE 7000F Ilam (FILM)
Download TDS
Description:
High tear strength
Good bubble stability and Processability
APPLICATION:
#Industrial packing bag
#Shopping bag and Trash bag
Excellent mechanical strength and high stiffness Excellent processability (at high speed)
Tissue-like film, garment/grocery/merchandise bags, disposal waste bags, counter bags,
grocery sacks, trash bags
Description
Additional information
MFI | 0.04 |
---|---|
Density | 952 |
Reviews (0)
Be the first to review “HDPE 7000F Ilam (FILM)” Cancel reply
Related products
HDPE 7000F Mehr (FILM)
Download TDS 7000 F is a high density polyethylene resin ;a product of bi-modal process from Mitsui Chemicals, Inc. of JapanAPPLICATION:Excellent mechanical strength and high stiffness Excellent process ability (at high speed)
Tissue-like film, garment/grocery/merchandise bags, disposal waste bags, counter bags,
grocery sacks, trash bags
MFI | 0.04 |
---|---|
Density | 0.954 |
PP 1102XL (Extrusion)
MFI | 5.5 |
---|
LDPE 2420H (MFI: 1.9)
Download TDS Product Description:
Lupolen 2420 H is a non -additivated,low density Polyethylene.It is delivered in
pellet form.Applications:Bags & Pouches , Film , Shrink Film , Blown Film , Cast FilmProcessing Method: Cast Film , Blown FilmFeatures: Good Heat Seal, Optical, Good Processability
MFI | 1.9 |
---|---|
Density | 0.924 |
LDPE 2130 (MFI: 0.3)
Download TDS Product Description:
LFI2130 is a high molecular weight, low density polyethylene for producing heavy-duty packaging films for applications like shrink hoods. It contains no slip agent and antiblock additives. It gives outstanding strength and toughness, draw down ability and very good biaxial shrink properties. LFI2130 has been manufactured under SABTEC licensed technology.Applications:Blown film extrusion, heavy duty packaging film, shrink hoods, industrial sacks, carrier bag and liners.Status: Commercial: ActiveForm(s): PelletAttribute:
Good strenght and toughness, very good melt strength.Additives:
Antioxidant: Yes
Antiblock : No
Slip Agent : No
MFI | 0.3 |
---|---|
Density | 921 |
HDPE CRP100N (PIPE)
Download TDS HM-CRP100N (PE100) is a natural pipe grade resin which
is manufactured by suspension polymerization of ethylen
monomer, HM-CRP100N )PE100) is a bi-model high density
polyethylene with 1-Butene as co monomer.Main Applications
• Top quality PE100 pressure
• Pipes for gas and water
transportaion at higher pressures
or with thinner walls as PE80 (UV
stabilization and/ or pigments during
precessing)Characteristic
Properties
• Natural PE100 pipe resin.Additives
• Antioxidant/Process stabilizer
• Lubricant (processing aid)/ acid
scavenger
MFI | 0.22 |
---|
LLDPE 22B02 (MFI: 2)
Download TDS Typical applications :
For use in lean and rich blend blown film application such as over wrap,
Counter bags, shrink film and boil in the bag applications
Artificial grass
MFI | 2 |
---|---|
Density | 0.920 |
EPS F300
Bead size - Diamenter | 0.7 – 0.9 mm |
---|
LLDPE 209AA ARAK (MFI: 0.9)
Download TDS Main application & Characteristics:
LL0209AA are linear low density polyethylene copolymers containing butene-1
.as a co-monomerLL0209AA are suitable for general purpose films, neat or in lean blends with
LDPE and other ethylene polymers. Lean blends applications include sacks of all
. types, FFS and agricultural filmsIn lean blends they offer the following advantages:
− Greater draw down.
− Improved hot-tack and lower seal shrinkage.
− Better tear resistance.
− Higher tensile stress and elongation at break.LL0209AA should be stored in the dry condition below the 50°C and avoided
. from the exposure of direct sunlight
. Recommended melt temperature for extrusion is about 180°C - 225°C
.LL0209AA are suitable for food contact
MFI | 0.9 |
---|---|
Density | 0.920 |
Reviews
There are no reviews yet.