HD3840UA has the following characteristics:
good impact strength,easy to demould,uv stabilised,good whiteness,excellent surface finish.Applications:
general purpose rotomolded items,septic tanks,recycling banks.
| MFI | 4 |
|---|
Rotational HDPE 3840UA
HD3840UA (Rotational Moulding)
Product Description:
HD3840UA is a linear, UV stabilized virgin medium density polyethylene
copolymer grade (MDPE), with a narrow molecular weight distribution.
HD3840UA is high density polyethylene copolymer containing butene-1(C4) as comonomer. It is suitable for use as rotational moulding applications.
Characteristics:
− High stiffness.
− Good impact stress.
− Whiteness.
− UV stabilized.
− Good Stress Cracking Resistance.
− Excellent process-ability.
− Excellent internal and external surface finish.
Typical applications are:
− Rotational moulded items with good stiffness, such as: Septic tanks and
Ordinary containers.
− Injection moulded technical parts and closure
HD3840UA is suitable for food contact.
Description
Additional information
| MFI | 4 |
|---|
Reviews (0)
Download Catalogue
Related products
LLDPE 22B03 (MFI: 3)
Download TDS Application:
• High stiffness blown & cast
film
• Blending
• LaminationFeature:
Co monomer:butane-1(c4)
High stiffness Additives:
• Acid scavenger
• Antioxidants
• Lubricant
| MFI | 3 |
|---|---|
| Density | 0.920 |
HDPE CRP100N (PIPE)
Download TDS HM-CRP100N (PE100) is a natural pipe grade resin which
is manufactured by suspension polymerization of ethylen
monomer, HM-CRP100N )PE100) is a bi-model high density
polyethylene with 1-Butene as co monomer.Main Applications
• Top quality PE100 pressure
• Pipes for gas and water
transportaion at higher pressures
or with thinner walls as PE80 (UV
stabilization and/ or pigments during
precessing)Characteristic
Properties
• Natural PE100 pipe resin.Additives
• Antioxidant/Process stabilizer
• Lubricant (processing aid)/ acid
scavenger
| MFI | 0.22 |
|---|
PP 1102XK (Raffia)
| MFI | 4 |
|---|
LLDPE 209AA ARAK (MFI: 0.9)
Download TDS Main application & Characteristics:
LL0209AA are linear low density polyethylene copolymers containing butene-1
.as a co-monomerLL0209AA are suitable for general purpose films, neat or in lean blends with
LDPE and other ethylene polymers. Lean blends applications include sacks of all
. types, FFS and agricultural filmsIn lean blends they offer the following advantages:
− Greater draw down.
− Improved hot-tack and lower seal shrinkage.
− Better tear resistance.
− Higher tensile stress and elongation at break.LL0209AA should be stored in the dry condition below the 50°C and avoided
. from the exposure of direct sunlight
. Recommended melt temperature for extrusion is about 180°C - 225°C
.LL0209AA are suitable for food contact
| MFI | 0.9 |
|---|---|
| Density | 0.920 |
HDPE 5000s (Monofilament)
Download TDS Product Description:
HD‐5000S is a HDPE grade
specially designed for monofilament applications, which combines
good processability with high tenacity. This grade has good balance of
mechanical strength and high production rates. HD‐5000S is also well
suited for multiply applications, like ropes and stretched filaments.Typical Applications :
Fishing net, Rope, Agricultural net, Tarpaulin,
Woven sack.Characteristic
Properties :
good processability with high
tenacity, good balance of
mechanical strength and high
production ratesAdditives :
Antioxidants/Acid scavenger
Antiblock/Processing aid
| MFI | 0.8 |
|---|---|
| Density | 0.954 |
LDPE 2119 (MFI: 1.9)
Download TDS Product Description:LFI2119 is a low-density polyethylene, with excellent optical properties. This grade offers high output and excellent drawdown and specially designed for general-purpose thin films. LFI2119 has been manufactured under SABTEC licensed technology.Applications:Blown film extrusion, packaging film, general lamination filmStatus: Commercial: ActiveForm(s): PelletAttribute:
Very good optical properties, good toughness, good melt strengthAdditives:
Antioxidant: Yes
Antiblock : No
Slip Agent : No
| MFI | 1.9 |
|---|
HDPE 52518 (Injection)
Download TDS HD-52518 is a HDPE copolymer which manufactured by gas phase process. This grade is LLDPE Injection Moulding, Extrusion Coating & Rotomoulding. Injection molding for application requiring a good balance between easy of processability and flowability and mechanical properties are the special perpuse of this grade.Features
• Good balance between easy of
processability and flowabilityApplications
• Housewares
High fluidityAdditives
• Thermal Antioxidant
| MFI | 18 |
|---|---|
| Density | 0.952 |
PP 552R (Fiber)
| MFI | 25 |
|---|
Reviews
There are no reviews yet.