| MFI | 5.5 |
|---|
PP 1102XL (Extrusion)
POLYMER TYPE : POLYPROPYLENE HOMOPOLYMER
GRADE NAME : RG 1102 XL
PACKING : PP bags of 25 kgs, 50 bags on a pallet shrinked by PE
APPLICATION : Extrusion and injection moulding applications, raffia, tapes, monofilaments, diary products
PRODUCT FEATURES : Homopolymer with general extrusion additivation
PROCESSING METHOD : Extrusion
Description
Additional information
| MFI | 5.5 |
|---|
Reviews (0)
Related products
PS GPPS 1540 (MFI: 11)
| MFI | 11 |
|---|
SD0150 ABS
| MFI | 1.7 |
|---|
HDPE 5000s (Monofilament)
Download TDS Product Description:
HD‐5000S is a HDPE grade
specially designed for monofilament applications, which combines
good processability with high tenacity. This grade has good balance of
mechanical strength and high production rates. HD‐5000S is also well
suited for multiply applications, like ropes and stretched filaments.Typical Applications :
Fishing net, Rope, Agricultural net, Tarpaulin,
Woven sack.Characteristic
Properties :
good processability with high
tenacity, good balance of
mechanical strength and high
production ratesAdditives :
Antioxidants/Acid scavenger
Antiblock/Processing aid
| MFI | 0.8 |
|---|---|
| Density | 0.954 |
LLDPE 209AA ARAK (MFI: 0.9)
Download TDS Main application & Characteristics:
LL0209AA are linear low density polyethylene copolymers containing butene-1
.as a co-monomerLL0209AA are suitable for general purpose films, neat or in lean blends with
LDPE and other ethylene polymers. Lean blends applications include sacks of all
. types, FFS and agricultural filmsIn lean blends they offer the following advantages:
− Greater draw down.
− Improved hot-tack and lower seal shrinkage.
− Better tear resistance.
− Higher tensile stress and elongation at break.LL0209AA should be stored in the dry condition below the 50°C and avoided
. from the exposure of direct sunlight
. Recommended melt temperature for extrusion is about 180°C - 225°C
.LL0209AA are suitable for food contact
| MFI | 0.9 |
|---|---|
| Density | 0.920 |
HDPE BL3 JAM (BlowMolding)
Download TDS HF-4760(BL3) is a blow molding grade resin with high density polyethylene with
1-Butene as co monomer which is manufactured by the suspension polymerization
of ethylene monomer. Stiffness, good ESCR are it's spetial properties. High
rigidity and good flowablity which made it proper for usage in bottles and small
blow molding goods.ApplicationsSmall blow moulding
Bottles
Containers (up to 5 lit )
Packing of pharmaceuticals & surfactantsAdditives:
• Antioxidant/Process stabilizer
• Lubricant/ acid scavengerFeatures:
• High density and Stiffness, good
flowabilitty and impact Stvength
and good Stvess Cvacking resistance.
| MFI | 23 |
|---|---|
| Density | 0.954 |
LLDPE 22B03 (MFI: 3)
Download TDS Application:
• High stiffness blown & cast
film
• Blending
• LaminationFeature:
Co monomer:butane-1(c4)
High stiffness Additives:
• Acid scavenger
• Antioxidants
• Lubricant
| MFI | 3 |
|---|---|
| Density | 0.920 |
LDPE 2420H (MFI: 1.9)
Download TDS Product Description:
Lupolen 2420 H is a non -additivated,low density Polyethylene.It is delivered in
pellet form.Applications:Bags & Pouches , Film , Shrink Film , Blown Film , Cast FilmProcessing Method: Cast Film , Blown FilmFeatures: Good Heat Seal, Optical, Good Processability
| MFI | 1.9 |
|---|---|
| Density | 0.924 |
LDPE 2420D (MFI: 0.25)
Download TDS Product Description:
Lupolen 2420 D is a non -additivated,low density Polyethylene.It is delivered in
pellet form.Applications:Food Grade
Bags & Pouches
Bottles for Consumer Goods
Shrink Film
Blown Film
FilmProcessing Method:Blown Film
Injection Moulding
Extrusion Blow MouldingFeatures: Good Processability, Good Tear strength, Good Toughness
| MFI | 0.25 |
|---|---|
| Density | 0.923 |
Reviews
There are no reviews yet.