| MFI | 18 |
|---|---|
| Density | 0.952 |
HDPE 52518 (Injection)
HD-52518 is a HDPE copolymer which manufactured by gas phase process. This grade is LLDPE Injection Moulding, Extrusion Coating & Rotomoulding. Injection molding for application requiring a good balance between easy of processability and flowability and mechanical properties are the special perpuse of this grade.
Features
• Good balance between easy of
processability and flowability
Applications
• Housewares
High fluidity
Additives
• Thermal Antioxidant
Description
Additional information
| MFI | 18 |
|---|---|
| Density | 0.952 |
Reviews (0)
Download Catalogue
Related products
LDPE 2119 (MFI: 1.9)
Download TDS Product Description:LFI2119 is a low-density polyethylene, with excellent optical properties. This grade offers high output and excellent drawdown and specially designed for general-purpose thin films. LFI2119 has been manufactured under SABTEC licensed technology.Applications:Blown film extrusion, packaging film, general lamination filmStatus: Commercial: ActiveForm(s): PelletAttribute:
Very good optical properties, good toughness, good melt strengthAdditives:
Antioxidant: Yes
Antiblock : No
Slip Agent : No
| MFI | 1.9 |
|---|
LDPE 2102 (MFI: 1.9)
Download TDS Product Description:
LDPE 2102TX00 is low density polyethylene for production of general purpose film.Applications:For general purpose film without additives.used in a wide range of widths and thicknesses for pouches ,bags , liners and lamination film.Additives:
Anti oxidant
| MFI | 1.9 |
|---|---|
| Density | 921 |
LLDPE 209AA ARAK (MFI: 0.9)
Download TDS Main application & Characteristics:
LL0209AA are linear low density polyethylene copolymers containing butene-1
.as a co-monomerLL0209AA are suitable for general purpose films, neat or in lean blends with
LDPE and other ethylene polymers. Lean blends applications include sacks of all
. types, FFS and agricultural filmsIn lean blends they offer the following advantages:
− Greater draw down.
− Improved hot-tack and lower seal shrinkage.
− Better tear resistance.
− Higher tensile stress and elongation at break.LL0209AA should be stored in the dry condition below the 50°C and avoided
. from the exposure of direct sunlight
. Recommended melt temperature for extrusion is about 180°C - 225°C
.LL0209AA are suitable for food contact
| MFI | 0.9 |
|---|---|
| Density | 0.920 |
PS GPPS 1540 (MFI: 11)
| MFI | 11 |
|---|
SD0150 ABS
| MFI | 1.7 |
|---|
HDPE 5000s (Monofilament)
Download TDS Product Description:
HD‐5000S is a HDPE grade
specially designed for monofilament applications, which combines
good processability with high tenacity. This grade has good balance of
mechanical strength and high production rates. HD‐5000S is also well
suited for multiply applications, like ropes and stretched filaments.Typical Applications :
Fishing net, Rope, Agricultural net, Tarpaulin,
Woven sack.Characteristic
Properties :
good processability with high
tenacity, good balance of
mechanical strength and high
production ratesAdditives :
Antioxidants/Acid scavenger
Antiblock/Processing aid
| MFI | 0.8 |
|---|---|
| Density | 0.954 |
Reviews
There are no reviews yet.